low cost diffused junction low leakage low forward voltage drop high current capability and similar solvents case:jedec do-15,molded plastic terminals: axial lead ,solderable per mil- std-202,method 208 polarity: color band denotes cathode weight: 0.014 ounces0.39 grams mounting pos ition: any maximum ratings and electrical characteristics ratings at 25 ambient temperature unless otherwise specified. single phase,half wave,60 hz,resistive or inductive load. for capacitive load,derate by 20%. rgp 10d rgp 10g rgp 10j rgp 10k rgp 10m units maximum recurrent peak reverse voltage v rrm 200 400 600 800 1000 v max imum rms v oltage v rms 140 280 420 560 700 v maximum dc blocking voltage v dc 200 400 600 800 1000 v maximum average forw ard rectified current 9.5mm lead length, @t a =75 peak forw ard surge current 8.3ms single half-sine-w ave superimposed on rated load @t j =125 maximum instantaneous forw ard voltage @ 1.0 a v f v maximum reverse current @t a =25 at rated dc blocking voltage @t a =100 maximum reverse recovery time (note1) t rr 250 ns typical junction capacitance (note2) c j pf typical thermal resistance (note3) r ja <d operating junction temperature range t j storage temperature range t stg note:1. measured with i f =0.5a, i r =1a, i rr =0.25a. do - 15 50 35 50 rgp 10a easily cleaned with freon,alcohol,isopropanol 100 70 a i fsm 3. thermal resistance f rom junction to ambient. a 2. measured at 1.0mhz and applied rev erse v oltage of 4.0v dc. - 55---- + 150 - 55---- + 150 50 150 15 i r 30.0 10.0 200.0 1.3 500 voltage range: 50 --- 1000 v current: 1.0 a 100 rgp 10b 1.0 a i f(av) the plastic material carries u/l recognition 94v-0 dimensions in millimeters rgp10a-rgp10m fast recovery rectifiers features mechanical data http://www.luguang.cn mail:lge@luguang.cn
-1.0a -0.25a 0 +0.5a t rr 1cm pulse generator (note2) d.u.t. 1 n.1. 50 n.1. oscilloscope (note 1) (+) 50vdc (approx) (-) 10 n.1. (-) (+) t j -1 00 t j -2 5 t j -7 5 0.01 0 0.1 1.0 10 20 40 60 100 80 120 140 1 0.1 1 0.4 10 100 10 20 5 2 50 0.2 2 4 4020 100 t j =25 f=1mh z 0.5 0.7 0.9 1.1 1.3 1.5 0.04 0.1 0.4 1.0 1.2 1.4 2.0 10 t j =25 pulse width=300 s 1.7 1.9 0 0 1 10 5 10 15 25 30 20 100 4 2 4020 t j =125 8.3ms single half sine-w ave 0 .2 .4 .6 .8 0 25 50 75 100 125 150 single phase hal f w ave 60h z resistive or inductive load 0.375"(9.5mm) lead length 1.0 200 175 average forward rectified c amperes peak forward surge current amperes forward current amperes reverse current amperes junction capacitance,p f reverse voltage,volts 2. rise time=10ns ma x. source impeda nce=5o set time base for 50/100 ns /cm fi g. 6 -- reverse recovery ti me characteri sti c and test ci rcui t di agram fi g. 5 -- typi cal juncti on capaci tance reverse voltage,volts percent of rated peak reverse voltage,% notes:1.rise time =7ns max. input impedance=1m .22pf fi g. 3--typi cal forword characteri sti c fi g. 1 -- forward derati ng curve fi g. 2--peak forword surge current fi g. 4 --reverse current vs reverse votage number of cycles at 60 hz ambient temperature, rgp10a-rgp10m fast recovery rectifiers ratings and charactieristic curves http://www.luguang.cn mail:lge@luguang.cn
|
